Chrysler Jeep Dodge MicroPod II .docxThis area will show you the access ALL members have in order to purchase and acquire ANY
Factory and/or Aftermarket Scan Tools and Software.
All of the variety of Scan Tools, Factory and Aftermarket is sold through Diagnostic Hotline
and AEuromotive, Inc. at a discounted price fro any and all Members.
Currently, I am in the process of uploading all of these scan tools with descriptive information
so that out Members will be fully aware of their capabilities. An additional phone call to Peter,
with your questions would be a wise thing to "Cover all of the bases".
If you have any questions regarding any of the listed tools, please call Peter Reese at 800-660-7156
or send him an email to firstname.lastname@example.org
Please Note! ALL pricing and availability fluctuates, depending on the market source and availability to the consumer!
We are not responsible for price fluctuation and availability, though as a Member of this Technical Group.......you go to the
"Head of the Line" when it comes to anything offered here as a "perk" for your Loyalty, and Support
Ford Factory IDS/VCMII
FORD IDS VCM II Tool ONLY $1,400.00 .docx
FORD IDS VCM (SOFTWARE LICENSE & WEBSITE) $799.00.docx
Ford IDS VCM 2 TOUGHBOOK TABLET FZ-G1 Complete Package $5,495.00 .docx
GM Factory MDI / Candi / Panasonic
GM MDI Panasonic TOUGHBOOK TABLET COMPLETE PACKAGE $5,495.00.docx
GM MDI Panasonic TOUGHBOOK CF-30 Package $2,995.00 .docx
GM TECH 2 .docx
Chrysler / Dodge / Jeep / Sprinter / WITECH
Chrysler Jeep Dodge MicroPod II .docx
CHRYSLER TECH AUTHORITY LICENSE ONE YEAR MICROPOD $1.495.00 .docx
CHRYSLER JEEP DODGE MICROPOD II - INCLUDES TOUGHBOOK FZ-G1 TABLET $6,495.00 .docx
ICOM A1 - ICOM B: $800.00.....OBO
This ICOM setup is the A1 / ICOM B System, first introduced. This version of the ICOM, when it first
was introduced for FACTORY Level Multiplexer. This is the first generation BMW ICOM device. ICOM A is the
In physical terms, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integration
to the repair shop network interfaces required.
Computer through an efficient core, which is responsible for testing as a protocol converter device and vehicle control
unit and connected to the data exchange between the measurement techniques required for signal processing. Supply
voltage by KL30 by vehicle interface.
ICOM A requirement of the electrical operation of a minimum voltage of 8VDC. Only
the supply voltage exceeds the minimum limit in order to ensure a stable function
ICOM B is the external ICOM B MOST (Multimedia Transmission System) interface. It is through the USB cable
to connect with ICOM A. Supply voltage provided by ICOM B through USB. Only when the lowest of the ICOM B
supply voltage of 8VDC, when, ICOM B would only be ready to run the electrical side of the vehicle through a
standard ICOM B MOST interface.
NOTE! Version A1 ICOM System will work with ISTA 3.50 or lower (ISTA Clone OFFLINE - ISTA VMware System OFFLINE - ISPI OFFLINE.